Getting your hands on the DDJ-FLX10 for the first time is an exciting moment – and it’s many people’s first ‘serious’ bit of DJ gear. This is a proper pro-level controller with features that rival real club setups.
If you’ve just bought a FLX10 and you want to know where to start, you’re in the right place. We’ll walk you through setting it all up so you’ll be ready to get mixing like a pro in no time. Let’s get started!
How to set up the DDJ-FLX10
Connecting the DDJ-FLX10 to Your Speakers
The DDJ-FLX10 offers a couple of different output options depending on what kind of speakers you’re using:
- XLR Outputs (Master 1): Perfect for professional setups like PA systems or studio monitors, these balanced outputs give you top-notch sound quality and minimise noise over long cable runs.
- RCA Outputs (Master 2): These unbalanced outputs are still great for home speaker setups or simpler connections. Use these if your speakers don’t support XLR inputs.
- 1/4-inch Booth Outputs: Designed for booth monitors, these balanced outputs allow you to hear your mix clearly in live performance settings. The booth output has its own volume control for independent adjustments.
When connecting these, make sure you match the output type to your speaker’s input requirements. Avoid using unbalanced adapters (e.g., XLR-to-RCA) on balanced outputs, as this can cause noise or degrade sound quality.
As you’d expect from a high-end controller, the DDJ-FLX10 has inputs and outputs for just about everything you’d need.
Powering Up the DDJ-FLX10
The DDJ-FLX10 comes with a dedicated AC adapter that plugs into the back. Unlike some other entry-level controllers, you can’t power this unit just off the USB; it needs to be connected to mains power to run. There’s a hook next to the power input to secure the power cord in place. Just wrap the cord around it before connecting, so it doesn’t get accidentally tugged out right in the middle of a set.
Setting Up the DDJ-FLX10 with rekordbox
- Visit the rekordbox website to download the latest version.
- Connect the DDJ-FLX10 to your computer using the USB cable. Rekordbox automatically unlocks performance mode when the controller is connected.
- Open rekordbox and configure the audio settings to route the master and headphone outputs to the DDJ-FLX10.
- Analyse your music library in rekordbox. This prepares tracks with beat grids, cue points, and other performance data.
Setting Up the DDJ-FLX10 with Serato DJ Pro
- Download Serato DJ Pro from the official website and install it on your computer.
- Connect the DDJ-FLX10 to your computer via USB. The controller automatically unlocks Serato DJ Pro without needing to buy a license.
- In Serato’s audio settings, assign the master and headphone outputs to the DDJ-FLX10.
- Analyse your tracks in Serato DJ Pro to set up beat grids, BPMs, and cue points.
Setting Up the DDJ-FLX10 with Virtual DJ
- Download and install Virtual DJ from its official website.
- Connect the DDJ-FLX10 to your computer using the USB cable. Virtual DJ may require a license purchase for full access to all features.
- Open the audio settings in Virtual DJ and route the master and headphone outputs to the controller.
- Analyse your music library to set up cue points, loops, and track overviews.
Troubleshooting Common Issues
| Problem | Solution |
|---|---|
| No Sound Output | Check all cable connections, ensure the [MASTER LEVEL] knob is turned up, and confirm your speakers are powered on. Verify the output settings in your DJ software are assigned to the DDJ-FLX10. |
| Controller Not Recognized by Software | Update your software, try a different USB cable or port, and ensure the correct audio driver is installed. |
| Track Separation Features Not Working | Make sure your tracks are analysed and meet the required file format standards. Confirm your computer meets the minimum system requirements for these features. |
| Lag or High Latency | Adjust the audio buffer size in your DJ software. Close any background applications that may be using system resources. |
| Microphone Sound Not Working | Ensure the [MIC OFF/ON/TALKOVER] switch is set correctly and adjust the [MIC LEVEL] knob to increase the microphone volume. |
| rekordbox or Serato Becomes Unstable | Quit unnecessary applications, ensure your laptop is connected to AC power, and update your DJ software to the latest version. |
Learn to DJ with the DDJ-FLX10
If you’ve just got a shiny new FLX10 and you want to put it through its paces, we’re here to help. We’ve got courses on both rekordbox and Serato that will take you through some more advanced mixing tricks that take your sets to another level.
Advanced
Rekordbox DJ Course
Advanced Serato DJ Course
0 Comments